Rotary table as an addition to the swivel base. In addition, the spindle vises SP 32 and SP 40 can be mounted directly Material Magnetizable chromesteel, rust-resistant Finish Completely hardened Completely precision grinded Accuracy Parallel-accuracy 0,003 mm Scope of delivery 1 Rotary table with operating instructions

The projector vice PSP 32 VA is designed for the universal use on measuring projectors. The workpieces can be clamped in step jaws or two vertical prisms on both sides of the vise Material Magnetizable chrome steel, rust-resistant Finish Completely hardened Completely precision grinded Accuracy Square-accuracy 0,005 mm Parallel-accuracy 0,003 mm Scope of delivery 1 Projector vise with operating instructions Operation Mechanical

The spring clamp is specially designed for holding small workpieces on a measuring microscope or profile projector Material Magnetizable chrome steel, rust-resistant Finish Completely hardened Completely precision grinded Accuracy Square-accuracy 0,005 mm Parallel-accuracy 0,003 mm Scope of delivery 1 Spring clamp with operating instructions Operation Mechanical

V-block with clamp. Material Steel Finish Completely hardened Completely precision grinded Accuracy Square-accuracy 0,01 mm Parallel-accuracy 0,01 mm Scope of delivery 1 V-block with operating instructions

Base made of either metal, granite or tool cabinets in various variants.The control plate can be supplied with steel T-slot rails or steel scew inserts. Material Natural granite Finish Finish 0, Other finish on requestSurface finish 0 Precision diamond lapped Accuracy Accuracy following DIN 876 Scope of delivery 1 Control plate including test certificate Notice Standard sizes in different dimensions Special versions on reques

The precision vice SP is designed for the universal use in the measuring and control room or for small maching work. Operation Mechanical Material Tool-steel Magnetizable chromesteel, rust-resistant Finish Completely hardened Completely precision grinded Scope of delivery 1 Vise with operating instructions Accuracy Square-accuracy 0,005 mm Parallel-accuracy 0,003 mm Hinweis Aluminium version with hardened universal jaws see chapter: ALUMESS – Fixturing systems

In conjunction with the swivel foot the precision vise can be used as a flexible support for surface inspection and for optical projectors. The swivel foot can be moved and clamped in two axes. Material Steel Finish Surface hardened Browned Scope of delivery 1 Swivel foot with operating instructions

The precision vise with axially swivellable base can be used for surface inspection, on optical projectors, hardness testers and small drilling and grinding work. With the precision worm gear drive the vise can be swivelled.The required angle can be adjusted with a vernier scale. The swivel range is ±60°. Material Magnetizable chromesteel, rust-resistant Finish Completely hardened Completely precision grinded Type AL Material Aluminium Finish Anodised Scope of delivery 1 Swivel base with operating instructions Accuracy Square-accuracy 0,005 mm Parallel-accuracy 0,003 mm Note Aluminium spindle vise SP with hardened universal jaws see chapter, ALUMESS – Fixturing systems

Scope of delivery 2 clamping jaws, plastic 2 step jaws, steel rust-resistant 1 prism jaws with stop pin, steel rust-resistant

Mounting holes on the bottom. It is supplied with the necessary side clamps for the vice. XY-travel 10×10 mm Reading 0,01 mm Material Aluminium Finish Anodized Hard coated Scope of delivery 1 Cross table with operating instructions

Indexing unit with keyless chuck for mounting on an articulated foot or for customer-specific applications. Fastening thread on the underside. Indexing unit 0435 for workpiece diameter 0,4 – 3,5 mm Indexing unit 1260 for workpiece diameter 1,2 – 6,0 mm Material Aluminium Finish Sand blasted Scope of delivery 1 Indexing unit with operating instructions

Universal clamp made of anodized aluminum for use with swivel foot. The workpiece can be fixed quickly and securely between three clamping pins. Material Aluminium Finish Anodized Scope of delivery 1 Universal clamp with operating instructions

The swivel foot for mini precision vise MP and intexing unit TA can be rotated and swivelled in all directions. Material Steel Finish Browned Scope of delivery 1 Swivel foot with operating instructions Notice The suitable mounting plate for the mini precision vise MP has to be ordered separately. For the indexing unit a mounting plate is not required.

This chuck is used for centric clamping of round workpieces in the field of measuring and testing, and for small machining work. The opening and closing of the jaws is done by the knurled ring at the outer diameter of the chuck. The jaws are reversible. Operation Mechanical Material Steel Finish Partially hardend Partially browned Scope of delivery 1 Clamping chuck with operating instructions 1 Set reversible jaws. Accuracy Centering accuracy 0,01 mm Repetition accuracy 0,005 mm Note Aluminium version see chapter, ALUMESS – Fixturing systems

The chucks in the DBF VA version are designed for applications in the field of measuring and for use on EDM machines. The chucks are built flat and therefore very lightweight. A wide adjusting range, good concentricity and high repetition accuracy guarantee excellent quality in the single piec production. The hardened clmaping jaws are reversible. Special clamping jaws are available upon request. Application Metrology EDM Laser machining Operation Mechanical Material Steel rust-resistant Finish Partially hardend Grinded Scope of delivery 1 Clamping chuck with operating instructions 1 Set reversible jaws Accuracy Centering accuracy 0,01 mm Concentricity < 0,02 mm Repetition accuracy < 0,005 mm Note Optional: Standard mounting flange Aluminium version see chapter, ALUMESS – Fixturing systems

The high precision clamping chucks SF HQ, due to their high precision mainly in the field of measuring, grinding and EDM used. The contact pins are replaceable. Strong Points Part set up time is dramatically reduced due to the chuck’s ability to maintain concentricity as part diameters change. Material Steel, rust-resistant Finish Hardend Grinded Accuracy Concentricity < 0,01mm Repetition accuracy 0,002mm Scope of delivery 1 Clamping chuck with operating instructions 1 Torque wrench Notice Square version available on request. Operation Mechanical

The angle table is used as a universal base element on surface measuring units as well as on contour and surface measuring machines. With the use of the knurled screw the locating plate can be tilted by ±2,5°. By the hole pattern different support and clamping elements can be mounted Material Steel Finish Browned Scope of delivery 1 Angle table with operating instructions Applications: Angle table with chuck The chuck is used for centric clamping of round workpieces on the angle table. Angle table with centering clamp The centric vice is used for the centric clamping of round and cubic workpieces on the angle table. With the help of the universal jaws, both horizontal and vertical clamping can be realized.

Precision vise in brass chromed, anodised aluminium or rust-resistant steel. For clamping small parts on a measuring microscope,profile projector as well as various other applications. Replaceable jaws of rust-resistant steel as well as plastic are part of the scope of delivery. Fixed clamping jaws provided with a prism, versatile clamping options provides for lindrical parts. The additional prism on the fixed jaw and the clamping slots on the sides of the vise increase the possibilities. Material Type MS: Brass Type AL: Aluminum Type VA: Steel, rust-resistant Finish Type MS: Chromed Type AL: Anodised Type VA: Hardened, grinded Accuracy Square-accuracy 0,02 mm Parallel-accuracy 0,02 mm Scope of delivery 1 Mini precision vise MP with operating instructions 2 Clamping jaws, plastic 2 Clamping jaws, steel rust-resistant

The adjustable V-blocks are made for universal use on grinding milling and drilling machines. With the precision worm gear drive the V-block can be swivelled. Material Steel Finish Completely hardened Completely precision grinded Accuracy Angle-accuracy ±10’ Scope of delivery 1 Adjustable V-block with operating instructions Swivelling range 0°-60° Reading Via nonius

The swivel foot for mini precision vise MP and intexing unit TA can be rotated and swivelled in all directions. Material Aluminum Scope of delivery 1 Mounting plate for mini precision vises

V-block with clamp, grinded in pairs. Material Steel Finish Completely hardened Completely precision grinded Accuracy Square-accuracy 0,003 mm Parallel-accuracy 0,003 mm Scope of delivery 2 V-blocks with operating instructions

The angle protractor, which has been awarded with the international prize "GOOD PRODUCT" in Geneva, meets the highest requirements at a technical level. The service-friendly design and measuring exactness of the protractor means that it is a tool which combines good results with economicalness. Micro-ball bearing for high repetition exactness. Precise and constant movement of the pointer by a temerature ajustable oil which enlarges optically the pointer Measuring graduations can be metric or the english system can be used, turnable to 360°. Double annular graduations are provided for preventing visual reading error The double-rail magnet may attract this angle level on a surface of ferrous material. An extension rule may be inserted into the bottom slot for measurement and drawing line for wider area. Scope of delivery 1 Angle Protractor with operating instructions 1 Case