Mechanical centre-clamping vises

The centre-clamping vise series MZC is characterized by a massive and torsion-free construction. The large clamping width and the high clamping force enable the universal and flexible use on multi-axis machining centres. Due to the optimized and compact design as well as the wide range of clamping jaw types an optimal accessibility to the workpiece for different customer needs respectively an optimal accessibility on different machine concepts can be reached. Strong Points First and second setup in the highest quality Unmachined and pre-machined workpieces High clamping and holding force 100% encapsulated design Fields of application Single-part / small series production High quality milling, HPC Clamping from outside to inside (external clamping) Clamping from inside to outside (internal clamping) Material Tempered tool steel Finish Surface hardened Functional surfaces precision grinded Hardened spindle (Type E) Hardened and grinded spindle (Type S) Ground in and clearance-free adjusted base jaws Scope of delivery 1 Centre-clamping vise with operating instructions 1 Pair reversible stepped jaws Accuracy MZC type E Centering accuracy ±0,015 mm* Repetition accuracy 0,01 mm Pairing accuracy 0,01 mm MZC type S Centering accuracy ±0,005 mm* Repetition accuracy 0,003 mm Pairing accuracy 0,01 mm * to the alignment holes on the bottom side Practical advice Sealing air connection If necessary, additional sealing air offers protection against the permeation of coolants and dirt. Accessories Clamping jaws Center jaws General accessories

This centre-clamping vise series serves as a powerful and economical clamping device on multi-axis machining centres and automation systems. The exchangeable clamping jaws allow flexible use. The maximum access to the workpiece results from the compact design of the clamping device and allows the customer optimum accessibility in 5- and multi-axis machining processes. Strong Points Compact design Wide clamping range Interchangeable clamping jaws for various customer requirements Fields of application Single-part / small series production Clamping from outside to inside (external clamping) Clamping from inside to outside (internal clamping) Material Tempered tool steel Magnetizable chromesteel, rust-resistant (VA version) Finish Surface hardened Completely hardened (VA version) Functional surfaces precision grinded Hardened spindle Ground in base jaws Scope of delivery 1 Centre-clamping vise with operating instructions 1 Pair hard step jaws 89° Accuracy Centering accuracy ±0,015 mm* Repetition accuracy 0,01 mm Pairing accuracy 0,02 mm * to the alignment holes on the bottom side Accessories Clamping jaws Center jaws General accessories

The compact centre-clamping vise series MZR is used as a cost-effective clamping device for clamping raw parts on multi-axis machining centres and automation systems. It is used wherever maximum centering and repetition accuracy is not required. The clamping range can be enlarged by means of one-piece reversible jaws with integrated grip steps. Strong Points Attractively priced basic model Powerful form fit raw material clamping without pre-stamping Reversible jaws for maximum clamping range Fields of application Single-part / small series production Clamping from outside to inside (external clamping) Clamping from inside to outside (internal clamping) Material Tempered tool steel Finish Surface hardened Functional surfaces precision grinded Hardened spindle Fitted base jaws Accuracy Repetition accuracy 0,01 mm Pairing accuracy 0,03 mm Practical advice Best results with workpieces up to 600 N/mm 2 material strength Enlarge clamping width: Open vise – turn reversible jaws – clamp large workpieces Scope of delivery 1 Centre-clamping vise with operating instructions 2 Reversible jaws with grip Accessories Clamping jaws Center jaws General accessories

The centre-clamping vise series MZU with reversible top jaws gives the user the highest level of flexibility on multi-axis machining centres. The reversible stepped jaws with 3 ground clamping steps offer maximum accessibility, even for short cutting tools. Due to the variable stepped form of the reversible top jaws the complete clamping range can be covered. Strong Points Large clamping range due to reversible top jaws Maximum flexibility Maximum accessibility Fields of application Single-part / small series production Clamping from outside to inside (external clamping) Clamping from inside to outside (internal clamping) Material Tempered tool steel Finish Surface hardened Functional surfaces precision grinded Hardened spindle Ground in base jaws Scope of delivery 1 Centre-clamping vise with operating instructions 1 Pair hard reversible stepped jaws Accuracy Centering accuracy ±0,015 mm* Repetition accuracy 0,01 mm Pairing accuracy 0,02 mm * to the alignment holes on the bottom side Note Mechanical compact vise with workpiece clamping against fixed stop. Accessories Clamping jaws Center jaws General accessories Practical advice The version with reinforced base jaws is used for the assembly of high/large top jaws.

The large product variety and the high centering and repetition accuracy make this centre-clamping vise series an universal clamping solution especially for already premachined workpieces or precision parts. The high rigidity of the vise body as well as the optimal guide ways of the guide jaws allow high clamping accuracy. Strong Points High clamping accuracy High centering and repetition accuracy Large variety Fields of application Single-part / small series production High quality milling, HSC Clamping from outside to inside (external clamping) Clamping from inside to outside (internal clamping) Material Tempered tool steel Finish Surface hardened Functional surfaces precision grinded Hardened and grinded spindle Ground in and clearance-free adjusted base jaws Scope of delivery 1 Centre-clamping vise with operating instructions 1 Pair soft block jaws (type A) 1 Pair hard clamping jaws (type B) Accuracy Centering accuracy ±0,005 mm* Repetition accuracy 0,003 mm Pairing accuracy 0,01 mm * to the alignment holes on the bottom side Accessories Clamping jaws Center jaws General accessories

The large product variety and the high centering and repetition accuracy make this centre-clamping vise series an universal clamping solution especially for already premachined workpieces or precision parts. The high rigidity of the vise body as well as the optimal guide ways of the guide jaws allow high clamping accuracy. Strong Points High clamping accuracy High centering and repetition accuracy Large variety Fields of application Single-part / small series production High quality milling, HSC Clamping from outside to inside (external clamping) Clamping from inside to outside (internal clamping) Material Tempered tool steel Finish Surface hardened Functional surfaces precision grinded Hardened and grinded spindle Ground in and clearance-free adjusted base jaws Scope of delivery 1 Centre-clamping vise with operating instructions 1 Pair soft block jaws (type A) 1 Pair hard clamping jaws (type B) Accuracy Centering accuracy ±0,005 mm* Repetition accuracy 0,003 mm Pairing accuracy 0,01 mm * to the alignment holes on the bottom side Accessories Clamping jaws Center jaws General accessories

The centre-clamping vise series MZQ with quick change jaws enables replacement of the jaws within seconds. They are designed specifically for use within pallet handling and for several times a day retooling the centre-clamping vises. The reversible step jaws allow maximum accessibility even with short cutting tools. Due to the stepped form of the reversible top jaws, the complete clamping range can be covered. Strong Points Changing jaws within seconds, without using tools! Over 80 % less setup costs Large clamping range due to reversible top jaws Fields of application Single-part / small series production Clamping from outside to inside (external clamping) Material Tempered tool steel Finish Surface hardened Functional surfaces precision grinded Hardened spindle Ground in base jaws Accuracy Centering accuracy ±0,015 mm* Repetition accuracy 0,01 mm Pairing accuracy 0,02 mm * to the alignment holes on the bottom side Practical advice Ideal for daily repeated retooling; time savings in use on automation systems. Scope of delivery 1 Centre-clamping vise with operating instructions 1 Pair hard reversible stepped jaws Note Patented clamping jaw cutting position. Can also be used with adapter jaws vice models or clamping vise models or clamping devices from other suppliers. Accessories Clamping jaws Center jaws General accessories

The centre-clamping vise series MZX is used as a powerful, universal and reliable clamping device on zero-point systems. The base body of the vise is provided with system holes suitable for LANG or market competitors, grid dimension 52 × 52 mm or 96 × 96 mm. Whether raw material clamping with or without prestamping. Our reversible jaw variants offer the perfect solution.Type LAReversible grip jaws according to the LANG systemPre-stamping the workpiece is requiredType SP Reversible grip jaws according to the SPREITZER systemClamping of raw parts without pre-stampingType GLReversible step jaws with grip insertsFlexible clamping of raw parts without pre-stampingGrip inserts / clamping inserts can be replaced depending on the workpiece requirementsAccuracyRepetition accuracy 0,01 mmPairing accuracy 0,03 mm