Fixed Stop SPVPL MA/MAR
Fixed stop for vacuum plate SPVPL MA and vacuum plate SPVPL MAR, incl. dead center and knurled nut.
Notice
Please note: The sealing rubber cord is used to seal the vacuum grid plates with slots.
The diameter of the sealing cord depends on the cross-section of the slot.
If the plate is reworked, a smaller seal cord diameter must be selected.
Friction pad SPVPL MAR
Friction pad for vacuum plate SPVPL MAR
Notice
Please note: The sealing rubber cord is used to seal the vacuum grid plates with slots.
The diameter of the sealing cord depends on the cross-section of the slot.
If the plate is reworked, a smaller seal cord diameter must be selected.
Hole rubber mat
The perforated rubber mats with a 20mm grid are also ideal for use on vacuum plates with a 10mm grid. Due to the larger holes in the rubber mat, these are always aligned with the suction holes of the vacuum table, even if the mat slips a little when the workpiece is placed on it. This is especially helpful for larger or heavy parts!
When ordering please specify the size L x W mm. Example: B900501671 – 600x400mm
Material
Rubber
Scope of delivery
1 Perforated rubber mat
Vilmill
Vilmill is a fleece with a thermally activated surface that melts when it comes into contact with the milling tool and thus forms a form-fitting bond with the cutting edge. This creates a sealing edge that holds particularly small workpieces in position and can still be removed easily and without leaving any residue. The physical principle of operation logically means that Vilmill can only function if the machining heat is actually generated and is not otherwise dissipated, for example through large quantities of cooling lubricant. Due to the very good dimensional accuracy and the low thickness of only 0.2 mm, Vilmill can be used for precise machining and at the same time offers a sufficient milling distance to protect the substrate.
Clamp fleece
This foam fleece offers many advantages over other mill-through mats. The main advantage of the mat is that it is air permeable over the entire surface. This makes it easier to place on the vacuum table. It also offers high precision and is resistant to most cooling lubricants.
Material
Foam
Scope of delivery
1 Clamp fleece
Accessories – vacuum clamping technology
The vacuum generation by means of compressed air is characterized by a reasonable price. No additional electrical connections are required on the machine.
Vacuum distributor
Vacuum distributor for simple attachment to the frame of a CNC milling machine, or for wall-mounted installation.
Clamping claw
Clamping claws for the fixing of your tools, clapming systems or workpieces on your T-slot plate, thread grid plate or vacuumtalbes with thread grid.
Further accessories
Important note
Please note: The sealing rubber cord is used to seal the vacuum grid plates with slots. The diameter of the sealing cord depends on the cross-section of the slot. If the plate is reworked, a smaller seal cord diameter must be selected.