Einfach zu handhaben
Wirtschaftlich
Modular erweiterbar
Carrier plate
The carrier plate carries up to two pin supports or the according components on the connecting bolts. The elements can be moved stepless by 2 x 50 mm.
Scope of delivery
1 Carrier plate
Prism support
The prism support is used for cylindrical workpieces. They can be mounted in pairs on the carrier plate or individually on elements with .basic chucking spigot.
Scope of delivery: 2 pieces prism support
Hold down clamp, complete
The hold down clamp including location bolts and slidge rail can be mounted with the pin support.
The clamping force can be mechanically influenced by a second position of the clamping spring.
Upper clamping spring can be swivelled 360º.
Scope of delivery
1 Hold down clamp, complete
Compound resin receiver Ø60
Compound resin receiver for the preparation of part-specific work piece supports.
It can be fastened onto the .basic connecting bolt or the swivelling connecting bolt quickly and easily by means of the connecting plate provided.
Scope of delivery
For use with: modeling resin
Compound resin receiver jaws
Compound resin receiver jaws are used for creating part-specific, form-fitted workpiece forming jaws.
For use together with: Compound resin
Scope of delivery
2 Compound resin receiver jaws
For use together with:
Modeling resin
Compound resin
Compound resin for use with compound resin receiver or compound resin receiver jaws for creating part-specific, form-fitted workpiece supports or forming jaws. Tensile strength: 300 kg/cm2 Compression strength: 800 kg/cm2 Processing:
Mix and knead the two different components in ratio 1:1.
Position / clamp the workpiece into the compound resin.
The compound resin adjusts to the contours of the workpiece and produces a negative shape of the part.
Hardens within 3 hours at room temperature. Heat will accelerate the hardening.
Magnetic support
Support for the receive of magnetizable workpieces.It can be fastened onto the connecting bolts or the swivelling connecting bolts quickly and easily by means of the connecting plate provided.
Scope of delivery
1 Magnetic support
Connecting bolt with receiver ALUMESS.junior
Receiver for all .junior supporting elements
with connection diameter 6 mm.
For use together with:
Supporting flat .junior
Supporting pin X-stop .junior
Supporting pin XY-stop .junior
Supporting pin prism 90° .junior
Supporting center .junior
Supporting ball .junior
Pin support
The pin support is an universal work piece support. If you press the work piece into the support the easy flexible pins will fit to the work piece shape. By clamping off the pins the „negative shape“ can be fixed and enables a reproducible workpiece fixing. This can be easily and quickly fastened onto the connecting bolt or the swivelling connecting bolt by means of the connecting plate provided.
Receiver pin for hold down clamp
The receiver pin is assembled together with the hold down clamp.
For use together with:
Hold down clamp
Hold down clamp
The hold down clamp is used together with the receiver pin. The clamping force can be mechanically influenced by a second position of the clamping spring.
For use together with:
Receiver pin for hold down clamp,
Note:
Upper position of the clamping spring 360° swivelling.