Main application
- Tactile measurement
- Series measurement
- Low-priced entry-level system for coordinate measuring machines
Advantages
- User-friendly
- Low-priced
- Flexible
- Palletizable
Compound resin
Compound resin for use with compound resin receiver or compound resin receiver jaws for creating part-specific, form-fitted workpiece supports or forming jaws. Tensile strength: 300 kg/cm2 Compression strength: 800 kg/cm2 Processing:
Mix and knead the two different components in ratio 1:1.
Position / clamp the workpiece into the compound resin.
The compound resin adjusts to the contours of the workpiece and produces a negative shape of the part.
Hardens within 3 hours at room temperature. Heat will accelerate the hardening.
Eccentric clamping unit 16-M6 AL
The eccentric clamping unit is used as a quick and easy clamping module in the clamping kit. Due to the slot hole any position between the grid location pattern can be reached. It is used together with the receiver and stop pins.
Scope of delivery
1 Eccentric clamping unit 16-M6 AL
Fixing material:
Knurled screw M6×25
Eccentric clamping unit 34-M6 AL
The eccentric clamping unit is used as a quick and easy clamping module in the clamping kit. Due to the slot hole any position between the grid location pattern can be reached. It is used together with the receiver and stop pins.
Scope of delivery
1 Eccentric clamping unit 34-M6 AL
Fixing material:
Knurled screw M6×25
Clamping claw unit
Clamping claw unit for clamping and positioning of workpieces in X-, Y- and Z-axis.
Scope of delivery
1 Clamping claw unit
For use together with:
Connector Ø20 IM6-IM10
Stud bolt Ø20
Clamping spring element
Clamping spring element for quick and easy clamping of workpieces in connection with supporting and positioning elements
Scope of delivery
1 Clamping spring element
Notice
Clamping springs, set
For use together with:
Connector Ø20 IM6-IM10
Stud bolt Ø20
Clamping spring unit
Clamping spring unit for quick and easy clamping and positioning of the workpieces in the X, Y and Z axes.
Scope of delivery
1 Clamping spring unit
Notice
Clamping springs, set
For use together with:
Connector Ø20 IM6-IM10
Connector Ø20 AM10-IM10
Connector Ø25 AM10-IM10
Stud bolt Ø20/25
Connector Ø20 IM6-IM10
Connector for reception of the stud bolts on the basic elements.
Scope of delivery
1 Connector Ø20 IM6-IM10
Connector Ø20 AM10-IM6
Connector for reception of the stud bolts on the basic elements or locating plate.
Scope of delivery
1 Connector Ø20 AM10-IM6
Supporting rail
By the supporting rail the supporting and
positioning elements can be placed in three
axial directions. The supporting rail can be
steplessly moved and fixed on the stud bolt
and receiver M10 × 1 with Ø20mm.
Receiver .junior
Receiver for all fixture elements with connection diameter 6 mm.
For use together with:
Supporting pin X-stop .junior
Supporting ball .junior
Supporting flat .junior
Supporting center .junior
Supporting pin XY-stop .junior
Supporting pin prism 90° .junior
Supporting pin, flat ALUMESS.junior
Workpiece support
Scope of delivery
1 Supporting flat ALUMESS.junior
For use together with:
Receiver ALUMESS.junior
Supporting pin X-stop ALUMESS.junior
Workpiece support with fixed stop in one direction.
Scope of delivery
1 Supporting pin X-stop for ALUMESS.junior
For use with:
Receiver ALUMESS.junior
Supporting pin XY-stop ALUMESS.junior
Workpiece support with fixed stop in two directions.
Scope of delivery
1 Supporting pin XY-stop for ALUMESS.junior
For use together with:
Receiver ALUMESS.junior
Supporting pin prism 90° ALUMESS.junior
Prism 90° for receiving round workpieces.
Scope of delivery
1 Supporting pin prism 90° Alumess.junior
For use together with:
Receiver ALUMESS.junior
Supporting center ALUMESS.junior
Center for positioning and supporting of workpieces in boreholes.
Scope of delivery
1 Supporting center for ALUMESS.junior
For use together with:
Receiver ALUMESS.junior
Supporting pin XY-stop - M10×1
Workpiece support with fine thread. Fixed stop in two directions and clamping spring.
Scope of delivery
1 piece supporting pin
1 piece clamping spring l = 25/50 mm
Notice
Clamping springs, set: Bestellnr. B509800018
For use together with:
Receiver - M10×1
Prism receiver - M10×1
Prism receiver 90° - M10×1
Supporting pin X-stop - M10×1
Workpiece support with fine thread. Fixed stop in one direction and clamping spring.
Scope of delivery
1 piece supporting pin
1 piece clamping spring l = 25/50 mm
Notice
Clamping springs, set: B509800018
For use together with:
Receiver - M10×1
Prism receiver - M10×1
Prism receiver 90° - M10×1
Magnetic support Ø16
Support for the receive of magnetic workpieces.
Scope of delivery
1 Magnetic support Ø16
Magnetic support Ø30-3
Support for the receive of magnetic workpieces..
Scope of delivery
1 Magnetic support Ø30-3
Magnetic support Ø30-1
Support for the receive of magnetic workpieces.
Scope of delivery
1 Magnetic support Ø30-1
Compound resin receiver Ø30
Receiver for the preparation of part-specific workpiece supports.
Scope of delivery
1 Compound resin receiver Ø30
Clamping springs, set
Stable, versatile clamping system for series measurement on tactile measuring machines.
Set of clamping springs:
1 piece of l=25/50mm
1 piece of l=30/55mm
1 piece of l=35/60mm