Main application
- Tactile measurement
- Series measurement
- Universal use on coordinate measuring machines
Advantages
- Robust and solid
- Maximum universal
- Continuous hole grid
- Palletizable
Compound resin receiver jaws are used for creating part-specific, form-fitted workpiece forming jaws. For use together with: Compound resin Scope of delivery 2 Compound resin receiver jaws For use together with: Modeling resin
The eccentric clamping unit is used as a quick and easy clamping module in the clamping kit. Due to the slot hole any position between the grid location pattern can be reached. It is used together with the receiver and stop pins. Scope of delivery 1 Eccentric clamping unit 16-M6 AL Fixing material: Knurled screw M6×25
The eccentric clamping unit is used as a quick and easy clamping module in the clamping kit. Due to the slot hole any position between the grid location pattern can be reached. It is used together with the receiver and stop pins. Scope of delivery 1 Eccentric clamping unit 34-M6 AL Fixing material: Knurled screw M6×25
Clamping claw unit for clamping and positioning of workpieces in X-, Y- and Z-axis. Scope of delivery 1 Clamping claw unit For use together with: Connector Ø20 IM6-IM10 Stud bolt Ø20
Clamping spring element for quick and easy clamping of workpieces in connection with supporting and positioning elements Scope of delivery 1 Clamping spring element Notice Clamping springs, set For use together with: Connector Ø20 IM6-IM10 Stud bolt Ø20
Clamping spring unit for quick and easy clamping and positioning of the workpieces in the X, Y and Z axes. Scope of delivery 1 Clamping spring unit Notice Clamping springs, set For use together with: Connector Ø20 IM6-IM10 Connector Ø20 AM10-IM10 Connector Ø25 AM10-IM10 Stud bolt Ø20/25
By the supporting rail the supporting and positioning elements can be placed in three axial directions. The supporting rail can be steplessly moved and fixed on the stud bolt and receiver M10 × 1 with Ø20mm.
Stable, versatile clamping system for series measurement on tactile measuring machines. Set of clamping springs: 1 piece of l=25/50mm 1 piece of l=30/55mm 1 piece of l=35/60mm
Allows for cross-grid positioning of primitives. It can be screwed on using the centering sleeve and cylinder screw. Hole grid 20-M6. Scope of delivery 1 Leiste 1D Notice Grid type 20-M6 Fastening: Cap screw Centering sleeve
Allows for cross-grid positioning of primitives. It can be screwed on using the centering sleeve and cylinder screw. Hole grid 20-M6. Scope of delivery 1 Swivel plate Notice Grid type 20-M6 Fixing material: Cap screw Centering sleeve
The centre-clamping vise is the universal clamping element of the system. Various accessories are available for use in the measuring and testing laboratory or on the coordinate measuring machine. Material High strength aluminum Anodized Finish Anodized Scope of delivery 1 Centre-clamping vise MZE 1 Pair of universal prism jaws Fixing material: Base plate 150×150×12
Receiver rail for spindle vise SP 25 AL. For mounting the vise on the basic elements such as rails and angle plates. Scope of delivery 1 piece Receiving rail 4 piece screws
The universal clamping block and the fixed block are used directly on the basic plate or locating plate. Together they are used as an universal clamping vise on the basic plate. The available stepped receiver pins can be used as a workpiece support in a higher position.
The clamping block is an universally usable clamping module on the grid location pattern. Together with the supporting bolts and stop pins it can be used for a quick and easy clamping of workpieces to the given fixed stop. Scope of delivery 1 piece Clamping block 2 pieces Centering sleeves Ø10 2 pieces Cap screws M7
The clamping block is universally useable on the grid location pattern as clamping module. Together with the supporting bolts and stop pins it can be used for a quick and easy clamping of workpieces to the given fixed stop Scope of delivery 1 Clamping block 2 pieces Centering sleeves Ø14 2 Cylinder screw M10
The quick chuck on the base plate is intended for centrical clamping of round workpieces. Locating screws are used to fix it on the basic elements. Scope of delivery Quick chuck Ø1-13 mm Basic plate 80×80×12 mm Fixing material: Locating screw M7 Ø10×25 Locating screw M10 Ø14×30
For positioning chuck Ø80 or Ø125 on rotary table with 120° T-slot. Scope of delivery 1 piece center plate 2 pieces centering sleeves Ø10 2 pieces cap screws M6
Quick-change holder for fast and universal reception of spring clamp and parallel clamp. Scope of delivery 1 Quick-change holder
Small/light workpieces are held by the jaws of the parallel clamp by adjusted parallel aluminium jaws. Scope of delivery 1 Parallel clamp
The supporting plate can be used as an additional height positioning for the workpiece. It is mounted below the toggle clamp. Material Steel Scope of delivery 1 Support plate
The receiver joint has been mainly chosen for the positioning oft he toggle clamp on the workpiece. Aditionally, it can be combined with different fixture elements using the connection thread M6. Scope of delivery 1 piece Receiver joint 4 pieces fixing screws