By the supporting rail the supporting and positioning elements can be placed in three axial directions. The supporting rail can be steplessly moved and fixed on the stud bolt and receiver M10 × 1 with Ø20mm.
Connector for reception of the stud bolds Ø20 on the basic plate or locating plate. Scope of delivery 1 Connector Ø20 AM10-IM10
Connector for reception of the stud bolts Ø25 on the basic plate or locating plate. Scope of delivery 1 Connector Ø25 AM10-IM10
Connector with bore hole 10H8 as adapter in connection with receiver M10×1. Position hole 10H8, coaxial Scope of delivery 1 Connector Ø25 AM10-IM6P
Receiver for mounting all fixture elements with connection thread M16×1 on the pallet. Centering diameter Ø10 mm, coaxial
Receiver for all fixture elements with connection thread M16×1, for use on the basic plate or locating plate.Centering diameter Ø10 mm, coaxial
Receiver SW10 with fine thread for customer-specific applications. Scope of delivery 1 Receiver SW10 - M10×1 For use with:
Spring loaded center for positioning and supporting of workpieces in boreholes. The center can be combined with different fixture elements with connection thread M6. Material Center of stainless steel Scope of delivery 1 Center, spring-loaded
Prism 120° for receiving round workpieces. Scope of delivery 1 Prisma 120° - M10×1 For use together with: Receiver - M10×1 Receiver - M16×1 Prism receiver - M10×1 Prism receiver 90° - M10×1
Spring holder with clamping spring for fast an easy clamping of the workpieces in supporting prism. Scope of delivery 1 piece spring holder 1 piece clamping spring l = 25/50 mm Notice Clamping springs, set For use together with: Prism 120° - M10×1
120° prism for picking up round workpieces. For use with: Receiver - M16×1 Prism receiver - M10×1 Prism receiver 90° - M10×1
Spring holder with clamping spring for fast and easy clamping of the workpieces in supporting prism. Scope of delivery 1 pen holder 1 locating bolt 1 hold-down device 60 mm 2 mounting screws Notice Hold-down For use together with: Prism 120° - M16×1
Workpiece stop for mounting directly on the basic plate or locating plate. Scope of delivery Stop pin 1 piece of centering sleeves Ø14×16 1 piece of centering bolt Ø8-14 1 piece of cap screws M10×35
Band clamp for secure clamping of round workpieces in the V-block on the base plate. The fabric tape is placed around the workpiece. The tension lock is then closed. Scope of delivery 1 set winder tape clamp 1 set supporting prism 2 pieces centering sleeves Ø14 2 pieces cap screws M10×35 3 m cabric band 12×0,55 mm For use together with: Supporting prism
Winder tape clamp for supporting and secure clamping of round workpieces. The fabric band is placed around the workpiece, then wound by built-in reel. Scope of delivery 1 set support prism 4 pieces centering sleeves Ø10 4 pieces gap screws M6×25 3 m fabric band 12×0,55 mm
The pin support is an universal work piece support. If you press the work piece into the support the easy flexible pins will fit to the work piece shape. By clamping off the pins the „negative shape“ can be fixed and enables a reproducible workpiece fixing. This can easily be fastened onto the connecting bolt or the swivelling connecting bolt with the connecting plate provided. /p>
Base for supporting prism and strap tensioner. For mounting on base plate. Material Aluminum Scope of delivery 1 Base for supporting prism
The supporting prism serves for receiving of round workpieces on the basic elements. The clamping of the workpieces can be made by clamping claws or the clamping spring elements. Scope of delivery Supporting prism For use together with: Clamping claw Hold down clamp Fixing material:: Centering sleeve Cap screw
Prism support with tension spring for quick and easy clamping of the workpieces in the support prism. Scope of delivery 1 piece prism support 1 piece clamping spring l = 25/50 mm Note Clamping springs,
Workpiece support with fine thread for mounting with different supporting and positioning elements. For use together with: Receiver - M10 × 1 Receiver - M16 × 1 Prism receiver - M10 × 1 Prism receiver 90° - M10 × 1
Ball joint with fine thread for mounting with different supporting and positioning elements. The ball joint can be turned 360º and pivoted ± 30º.
Center for positioning and supporting of workpieces in boreholes. The center can be combined with different fixture elements with connection thread M6.