Compound resin receiver jaws
Compound resin receiver jaws are used for creating part-specific, form-fitted workpiece forming jaws.
For use together with: Compound resin
Scope of delivery
2 Compound resin receiver jaws
For use together with:
Modeling resin
Eccentric clamping unit 16-M6 AL
The eccentric clamping unit is used as a quick and easy clamping module in the clamping kit. Due to the slot hole any position between the grid location pattern can be reached. It is used together with the receiver and stop pins.
Scope of delivery
1 Eccentric clamping unit 16-M6 AL
Fixing material:
Knurled screw M6×25
Eccentric clamping unit 34-M6 AL
The eccentric clamping unit is used as a quick and easy clamping module in the clamping kit. Due to the slot hole any position between the grid location pattern can be reached. It is used together with the receiver and stop pins.
Scope of delivery
1 Eccentric clamping unit 34-M6 AL
Fixing material:
Knurled screw M6×25
Clamping claw unit
Clamping claw unit for clamping and positioning of workpieces in X-, Y- and Z-axis.
Scope of delivery
1 Clamping claw unit
For use together with:
Connector Ø20 IM6-IM10
Stud bolt Ø20
Clamping spring element
Clamping spring element for quick and easy clamping of workpieces in connection with supporting and positioning elements
Scope of delivery
1 Clamping spring element
Notice
Clamping springs, set
For use together with:
Connector Ø20 IM6-IM10
Stud bolt Ø20
Clamping spring unit
Clamping spring unit for quick and easy clamping and positioning of the workpieces in the X, Y and Z axes.
Scope of delivery
1 Clamping spring unit
Notice
Clamping springs, set
For use together with:
Connector Ø20 IM6-IM10
Connector Ø20 AM10-IM10
Connector Ø25 AM10-IM10
Stud bolt Ø20/25
Centre-clamping vise MZE 120-60 AL
The centre-clamping vise is the universal clamping element of the system. Various accessories are available for use in the measuring and testing laboratory or on the coordinate measuring machine.
Material
High strength aluminum
Anodized
Finish
Anodized
Scope of delivery
1 Centre-clamping vise MZE
1 Pair of universal prism jaws
Fixing material:
Base plate 150×150×12
Receiver rail for spindle vise
Receiver rail for spindle vise SP 25 AL. For mounting the vise on the basic elements such as rails and angle plates.
Scope of delivery
1 piece Receiving rail
4 piece screws
Universal clamping block and fixed block with 120° prism
The universal clamping block and the fixed block are used directly on the basic plate or locating plate. Together they are used as an universal clamping vise on the basic plate. The available stepped receiver pins can be used as a workpiece support in a higher position.
Clamping block for pallet
The clamping block is an universally usable clamping module on the grid location pattern. Together with the supporting bolts and stop pins it can be used for a quick and easy clamping of workpieces to the given fixed stop.
Scope of delivery
1 piece Clamping block
2 pieces Centering sleeves Ø10
2 pieces Cap screws M7
Clamping block for basic plate and locating plate
The clamping block is universally useable on the grid location pattern as clamping module. Together with the supporting bolts and stop pins it can be used for a quick and easy clamping of workpieces to the given fixed stop
Scope of delivery
1 Clamping block
2 pieces Centering sleeves Ø14
2 Cylinder screw M10
Quick-action chuck on base plate
The quick chuck on the base plate is intended for centrical clamping of round workpieces. Locating screws are used to fix it on the basic elements.
Scope of delivery
Quick chuck Ø1-13 mm
Basic plate 80×80×12 mm
Fixing material:
Locating screw M7 Ø10×25
Locating screw M10 Ø14×30
Center plate for clamping chuck AL
For positioning chuck Ø80 or Ø125 on rotary table with 120° T-slot.
Scope of delivery
1 piece center plate
2 pieces centering sleeves Ø10
2 pieces cap screws M6
Quick-change holder
Quick-change holder for fast and universal reception of spring clamp and parallel clamp.
Scope of delivery
1 Quick-change holder
Parallel clamp
Small/light workpieces are held by the jaws of the parallel clamp by adjusted parallel aluminium jaws.
Scope of delivery
1 Parallel clamp
Support plate
The supporting plate can be used as an additional height positioning for the workpiece. It is mounted below the toggle clamp.
Material
Steel
Scope of delivery
1 Support plate
Receiver joint M6
The receiver joint has been mainly chosen for the positioning oft he toggle clamp on the workpiece. Aditionally, it can be combined with different fixture elements using the connection thread M6.
Scope of delivery
1 piece Receiver joint
4 pieces fixing screws
Stepped top jaws for receiver pins
By the top jaws, the maximum clamping diameter is increased. The receiver pins allow the 6-side measurement.
Locating pins for clamping jaws
Locating pins suitable for clamping jaws B501000032 and clamping jaws B501000033
Material
stole
ground
Scope of delivery
3 recording pins
Spindle vise SP AL
The spindle vise is the universal clamping element of the system. Various accessories are available for use in the measuring and testing laboratory or on the coordinate measuring machine.
Material:
High-strength aluminium
Finish:
Anodized
Scope of delivery:
Spindle vise
1 piece step jaw
1 piece prism jaw
Fixing material:
Base plate 80 × 80 × 12
Base plate 135 × 100 × 12
Base plate 230 × 130 × 12s
Base jaws for three-jaw chuck DBF
Base jaws with mounting bolts for top jaws.
Material
Steel
Finish
Hardened, grinded
Scope of delivery
3 Base jaws
Stepped top jaws for three-jaw chuck DBF
Stepped top jaws.
Material
Steel
Finish
Hardened, grinded
Scope of delivery
3 Stepped top jaws
Note
Version for three-jaw chuck DBF-P available on request.
Toggle clamp HS
Toggle clamp for quick clamping or positioning of workpieces. Clamping lever and clamping arm are moving in opposite directions. The clamping force is adjustable.